After confirming this, you will come to the Network Settings - specify here a static IP address that is available on your local network. By clicking on Setup you get an overview of the configuration. After the Miniserver appears, it must be selected and enter the user data - Default: user name: admin and password: admin.
#LOXONE MINISERVER CENA SOFTWARE#
To create a new project in the software by clicking on New Project, select the miniserver and enter the appropriate project data in the following input masks. This PC must be connected to the same network router (W-LAN or LAN) to which the Miniserver was connected. To configure the Miniserver you need a PC on which the program Loxone Config is installed. Miniserver: The left LED flashes green regularly. 1 minute the Miniserver should be operational: Internet W-LAN router) and the miniserver must be connected to power. The LAN cable must be connected to the network router (e.g. First, the Miniserver must be installed and connected in your distributor.
All strings run together to the Miniserver to enable communication between the individual components: Light, shading, heating, buttons as well as your INSTAR IP camera. The home automation miniserver from Loxone connects all smart components in your apartment or house. Use the Loxone Miniserver as alarm server.Integrating the alarm input of the camera.Integrating the alarm output relay of the camera.Control INSTAR IP camera via the Loxone Miniserver.
0 kommentar(er)
